Geophysical Logging In Iron Ore

  1. Home
  2. News
  3. Geophysical Logging In Iron Ore
  • SURFACE GEOPHYSICAL INVESTIGATIONS

    Surface Geophysical Investigations

    SURFACE GEOPHYSICAL INVESTIGATIONS Introduction Surface geophysical surveys have been applied to mineral and petroleum exploration for many years. A magnetic compass was used in Sweden in the mid-1600s to find iron ore deposits. The lateral extent of the Comstock ore body was mapped using self-potential methods in the 1880s. A

  • Geophysical log applications to geological and

    Geophysical Log Applications To Geological And

    common logging data such as full waveform sonic, televiewer and the SIROLOG spectrometric natural gamma logging data are examined for different applications. Although the examples used here are mainly for coal mining applications, but they can be equally applied to hard rock metalliferous mining such as iron ore mining.

  • Geophysics and iron ore exploration CSIRO PUBLISHING

    Geophysics And Iron Ore Exploration Csiro Publishing

    Aeromagnetic and downhole logging data have been acquired for iron ore deposits at Jimblebar and Shay Gap-Yarrie in the Pilbara region of Western Australia. The Jimblebar deposits are from the Archaean-Early Proterozoic Hamersley Group and the Shay Gap-Yarrie deposits are from the Archaean Gorge Creek Megasequence. Aeromagnetic data are used to assist in regional mapping and

  • Geophysical Well Logging in Order to Reduce Operating

    Geophysical Well Logging In Order To Reduce Operating

    Oliveira S, Uendro C, Paranhos G, Carmo R, Braga M 2011 Gamma-gamma ray geophysical logging as a tool to aid in the description and geological interpretation. 2 nd Seminar of the Geology of Iron Ore and 1 st of Speleology. VALE, Belo Horizonte, in portuguese p.

  • GEOPHYSICAL METHODS IN EXPLORATION AND

    Geophysical Methods In Exploration And

    GEOPHYSICAL METHODS IN EXPLORATION AND MINERAL ENVIRONMENTAL INVESTIGATIONS by Donald B. Hoover, Douglas P. Klein, and David C. Campbell INTRODUCTION In the following discussion, the applicability of geophysical methods to geoenvironmental studies of ore deposits is

  • Geology Prospecting and Exploration for Iron Ore

    Geology Prospecting And Exploration For Iron Ore

    Apr 09, 2015 The geophysical techniques used in the search for iron ores, as in most geophysical mapping, are based upon the presence of measurable contrasts of physical properties between the ore minerals and the surrounding rocks.

  • GEOPHYSICAL EXPLORATION FOR IRON ORE

    Geophysical Exploration For Iron Ore

    GEOPHYSICAL EXPLORATION FOR IRON ORE PROSPECT USING GRAVITY METHOD IN MERU COUNTY, KENYA JOSEPH MUGACIA NGURU B.Ed Sc I56CE266212011 A research thesis submitted in partial fulfillment of the requirements for the award of the degree of Masters of Science in the School of Pure and Applied Sciences of Kenyatta University APRIL, 2019

  • Automated recognition of stratigraphic marker shales from

    Automated Recognition Of Stratigraphic Marker Shales From

    The mining of stratiform ore deposits requires a means of determining the location of stratigraphic boundaries. A variety of geophysical logs may provide the required data but, in the case of banded iron formation hosted iron ore deposits in the Hamersley Ranges of Western Australia, only one geophysical log type natural gamma is collected for this purpose.

  • Downhole Geophysics in Mineral Exploration Geology for

    Downhole Geophysics In Mineral Exploration Geology For

    Nov 18, 2014 Few ore minerals are actually magnetic but other magnetic minerals are common in alteration zones including the iron oxides e.g. hematite, maghemite, limonite, and some sulphides such as pyrrhotite. Downhole magnetic susceptibility probes inject a voltage into the surrounding rock and record the strength of the magnetic response produced by the ...

  • Geoventure Solution Sdn Bhd Geophysical amp Geological

    Geoventure Solution Sdn Bhd Geophysical Amp Geological

    Geophysical investigation to investigate karstic formation including cavity and pinnacle at Titiwangsa, Kuala Lumpur. 2019 Soil Investigation, Magnetic, and Resistivity Survey to identify and localize iron ore existence for iron ore exploration at Bukit Ibam, Pahang. 2018 Detail Discontinuity Rock Logging for MRT Project 2017

  • Exploration geophysics SEG Wiki

    Exploration Geophysics Seg Wiki

    Sep 13, 2019 Exploration geophysics is the applied branch of geophysics which uses surface methods to measure the physical properties of the subsurface Earth, along with the anomalies in these properties, in order to detect or infer the presence and position of ore minerals, hydrocarbons, geothermal reservoirs, groundwater reservoirs, and other geological structures.

  • Notice to ASX Rio Tinto

    Notice To Asx Rio Tinto

    Feb 17, 2021 Geophysical logging was completed for most drill holes employing a suite of down hole tools to obtain calliper, natural gamma and other data to assist in the interpretation of the stratigraphy. Geological modelling was performed by Rio Tinto Iron Ore geologists. The method involved interpretation of stratigraphy and mineralisation

  • Brian Makone Senior Geophysicist Quik Log Geophysics

    Brian Makone Senior Geophysicist Quik Log Geophysics

    Jan 2009 - Jun 20101 year 6 months. South Africa. Responsibilities included Geophysical wire-line logging and processing of borehole geophysical data. Mineral Slim wire-line data acquisition using Weatherford Technology and Instruments. Adhering to Weatherfords policies and operations excellence. Liaising with clients on projects.

  • Nuclear Magnetic Resonance NMR Mount Sopris Instruments

    Nuclear Magnetic Resonance Nmr Mount Sopris Instruments

    Nuclear Magnetic Resonance NMR. Borehole Nuclear Magnetic Resonance NMR or BMR is the advanced geophysical logging tool available for rent from Mount Sopris in collaboration with NMR Services Australia NMRSA. This tool provides an accurate characterization of pore structure in the subsurface by measuring signals from magnetic resonance.

  • Integrated geophysical approach in exploration of iron ore

    Integrated Geophysical Approach In Exploration Of Iron Ore

    Apr 14, 2021 The areas with iron ore deposits were expressed in the geophysical results by low resistivity, high chargeability, and moderate to high magnetic anomalies. Integrated interpretation of the obtained results revealed that the ore deposits exist in the form of lenses with variable thickness ranging from few meters to about 30-m thick.

  • Geophysical Well Logging in Order to Reduce

    Geophysical Well Logging In Order To Reduce

    gamma ray geophysical logging as a tool to aid in the description and geological interpretation. 2 nd Seminar of the Geology of Iron Ore and 1 st of Speleology. VALE, Belo Horizonte, in portuguese p. 75. 3. Rider M 2002 The geological interpretation of well logs. Whittles

  • Imaging iron ore from the Quadril225tero Ferr237fero Brazil

    Imaging Iron Ore From The Quadril225tero Ferr237fero Brazil

    Our estimated iron-ore mass agrees reasonably well with the information provided from the lithologic logging data of drill holes. In this geophysical study, the estimated iron-ore reserves are approximately 3 billion tons. Bibtex. articlecarlos2014, title Imaging iron ore from the Quadril tero Ferr fero Brazil using geophysical ...

  • Exploratory Drilling Guidelines for NMET Funded Projects

    Exploratory Drilling Guidelines For Nmet Funded Projects

    For soft, friable and powdery ore as in the case of iron, manganese and chromite the drill core sample is collected from the whole 1m length without any bias and thus around 1kg of sample ... - To strengthen pencil hole geophysical logging techniques. - To introduce increasing use of large diameter drills.

  • THE BASICS OF LOGGING CORE FOR EXPLORATION

    The Basics Of Logging Core For Exploration

    The grouper still notes and samples everything mineralized outside the known zones but the bulk of the logging time is in and around known ore zones. Separators pull out every change in core lithology, mineralogy and structure. Their logs are highly detailed and this type of logging is a must for new logging areas without well defined ore zones.

  • Gamma Gamma Density Terra Logging Data Services

    Gamma Gamma Density Terra Logging Data Services

    Iron Ore Considerations. Density logging tools were developed to work in the petroleum industry. As a result the devices have evolved to produce very accurate results with good hole conditions in sedimentary rocks having densities up to around 3 gcm 3. Reverse circulation drilling and formation densities above 4 gcm 3 are regularly seen in ...

  • 3 Technologies in Exploration Mining and Processing

    3 Technologies In Exploration Mining And Processing

    Many mineral discoveries since the 1950s can be attributed to geophysical and geochemical technologies developed by both industry and government. ... Down-hole logging is a standard technique in petroleum exploration. ... Flocculation technologies are used in the iron-ore industry to flocculate and recover iron oxide and in the clay industry to ...

  • Pilbara Iron Ore Project Prefeasibility on track

    Pilbara Iron Ore Project Prefeasibility On Track

    Mar 17, 2010 RC drilling Diamond drilling Geophysical logging RC chip logging Core logging Blacksmith camp For personal use only. PILBARA IRON ORE PROJECT - EUROZ PRESENTATION 17 MARCH 2010 13 Delta Indicated and Inferred Resource L,MDR Open

  • Mineral Exploration and Mine Planning

    Mineral Exploration And Mine Planning

    Local geophysical expertise at your fingertips. Experienced and widely acknowledged as a local expert, contact GAP Geophysics without delay for assistance with any. geophysical projects, mineral exploration, mine planning, geotechnical, hydrogeological and environmental investigations. Expert Geological Support Available locally - just a phone ...

  • Geophysical Well Logging in Order to Reduce Operating

    Geophysical Well Logging In Order To Reduce Operating

    References Kearey P, Brooks M, Hill I 2002 An introduction to geophysical exploration. Blackwell Science Ltd., London, pp. 281. Oliveira S, Uendro C, Paranhos G, Carmo R, Braga M 2011 Gamma-gamma ray geophysical logging as a tool to aid in the description and geological interpretation. 2 nd Seminar of the Geology of Iron Ore and 1 st of Speleology. . VALE, Belo Horizonte, in portuguese

  • EVALUATION OF GAMMAGAMMA WELL LOGGING

    Evaluation Of Gammagamma Well Logging

    site atgeophysical well logging campaigns. During Vale iron ore exploration activities which involved geophysical well logging, a number of measurements were per-formed at GWTF, resulting in a set of data used to verify the proper operation of atool ateld works. RESULTS For the set of blocks composing GWTFs measurement tower, a

  • Application of Borehole Imagery in Iron Ore Examples

    Application Of Borehole Imagery In Iron Ore Examples

    Application of Borehole Imagery in Iron Ore - Examples from the Hamersley Group, Western Australia. The borehole televiewer is a downhole geophysical logging device that produces continuous, oriented, 360 images of the drill hole wall. Two types of borehole images are currently being generated at the BHP Billiton Mount Whaleback deposit. The ...

  • Geophysical investigation of banded iron ore

    Geophysical Investigation Of Banded Iron Ore

    The banded iron ore mineralization at Ero was investigated using aeromagnetic, resistivity and induced polarization IP methods with the aim of characterizing the deposit. Analysis of the aeromagnetic data involved the application of reduced-to-equator transformation, derivative filters, analytic signal and source parameter imaging techniques. Computer modelling of some of the identified ...

  • Geophysical Exploration of Iron Ore Deposit in Kimachia

    Geophysical Exploration Of Iron Ore Deposit In Kimachia

    Abstract A combined geological and geophysical survey undertaken in Kimachia area of Meru County in central Kenya has established the existence of small scale iron ore deposit that seems to be part of a more extensive iron rich zone.

  • Application of borehole imagery in iron ore examples from

    Application Of Borehole Imagery In Iron Ore Examples From

    Jul 18, 2013 The borehole televiewer is a down-hole geophysical logging device that produces continuous, oriented, 360 images of the drill hole wall. Two types of borehole images are currently being generated at the Mount Whaleback iron ore deposit in Western Australia.

  • 2 3 5

    2 3 5

    logging is used downhole to determine the density ofiron ore, an important parameter in resource calculations. Frequent calibration ofthe probe with known reference samples is critical. KEY WORDS Banded Iron-formation,downhole logging, magnetics, Pilbara Craton, Robertson SF51-13,

  • Home Terra Logging Data Services

    Home Terra Logging Data Services

    Over 30 projects in iron ore, gold, Lithium and coal deposits geophysical, geological, geotechnical and petrophysical interpretation. Successfully developed the first dual density production program for the largest iron ore Australian producer, from initial technical design,

  • Application of the gravity method to iron ore exploration

    Application Of The Gravity Method To Iron Ore Exploration

    The gravity method was first applied to Fe ore exploration as a tool for detecting nonmagnetic ores, but advantages of this method over other exploration methods have also made it useful under certain geological conditions in the study of magnetic ores and regional structures favorable for the occurrence of Fe ore.

  • Prepared by SEC

    Prepared By Sec

    Geophysical logging was completed for the majority of the drill holes employing a suite of down-hole tools to obtain calliper, gamma, and other data to assist in the interpretation of the stratigraphy. Geological modelling was performed by Rio Tinto Iron Ore geologists.

  • PDF Evaluation of GammaGamma Well Logging Data

    Pdf Evaluation Of Gammagamma Well Logging Data

    Evaluation of Gamma-Gamma Well Logging Data Applied to Iron Ore Exploration Vale Geophysical Well Logging Test Facility Revista Brasileira de Geof sica, 2016 Henry Galbiatti

  • GEOPHYSICAL METHODS IN EXPLORATION AND

    Geophysical Methods In Exploration And

    Magnetic exploration may directly detect some iron ore deposits magnetite or banded iron formation, and magnetic methods often are an useful for deducing subsurface lithology and structure that may indirectly aid identification of mineralized rock, patterns of effluent flow, and extent of permissive terranes and or favorable tracts